Decora Roller Blinds
How To Install The Roller Blind
Step 1 - Choose How To Mount The Brackets
Select the method of mounting that is most suitable for you.A. Face mounting to the face or outside the window frame
B. Top mounting to an overhead surface such as the top of window frame or the ceiling.
C. Side mounting to the inside or between the sides of the window frame.
Step 2 - Position Brackets To Allow Free Operation
Make sure that the position of the brackets are such that the roller blind can operate without coming into contact with window or door handles or any other obstacales.Step 3 - Brackets Provided
The side ontrol bracket and the pivot bracket.
The blind is delivered with a Side Control Bracket and a Pivot Bracket.
Place the Side Control Bracket on the same side as the side the chain control is located on the blind.
Step 3 - Attach First Bracket
Mark the position of the first bracket, drill holes and fix the bracket in place.Step 4 - Attach second bracket level with first
Insert one side of the roller in the mounted bracket. Then place the other bracket on the other end of the blind and mark its position. Make sure that the second bracket is marked so that it is level with the first, drill the holes and fix the bracket in place.Step 5 - Mount Blind
Insert the pivot side of the blind into the pivot bracket.
Note the pivot end of the blind has a spring operation to facilitate mounting and unmounting the blind.
Insert the end of blind into the side control bracket as shown. The blind is secured to the bracket by the blue clip. Please ensure that the blue clip points towards the ground. Once the blind is inserted into the bracket, slide the blind until the blue clip is secured to the bracket.
Make sure that the chain hangs straight downward and when the blind is rolled up fully the chain joiner must be at the top rear of the mechanism.
Mounting Spring Loaded Blinds
